LNEYA Industrial Chillers Manufacturer Supplier
News
Model and size selection of cooling and heating circulator (pilot plant temperature control system)
The cooling and heating circulator adopts mechanical refrigeration, the low-temperature heating tube heats the high temperature, and the canned pump is used as the circulating pump. The liquid circulation of the whole system is closed and consists of two systems, each of which controls the corresponding system, and passes the heat transfer oil according to the process requirements. The cycle automatically adjusts heating or cooling. 1. The cooling and heating circulator consists of a pump, he...
View details
What if the cooling rate of the cooling and heating temperature control system of the reactor slows
LNEYA cooling and heating temperature control system is a laboratory instrument and equipment for temperature control of supporting reactors in pharmaceutical and chemical laboratories and other industries. It adopts a fully closed circulation pipeline system to maintain the stability of temperature control of reactors in reactors. The temperature range of the cooling and heating temperature control system of the reaction kettle is from - 120 ℃ to 350 ℃. Generally, the temperature selection ...
View details
Misunderstandings in the use of vacuum pump temperature control system
When using the vacuum pump temperature control system, only the correct operation method can ensure the normal and stable operation of the equipment. If there are many wrong operation behaviors, it will directly affect the normal use of the equipment, and even affect the cooling performance. 1. When starting up, adjust the pressure drop of the inlet and outlet water higher than the operating parameters. When the pressure drop is too high, open the inlet and outlet valves of the evaporator of...
View details
Installation method of heating and cooling temperature control system for automobile motor
In chemical and pharmaceutical, chemical laboratories, pilot plants and other industrial processes, the heating and cooling temperature control system is the most used equipment for temperature control in chemical manufacturing, so a highly dynamic temperature control system is required. When controlling the reactor temperature, exothermic and endothermic reactions must be compensated for with high speed and reliability. Selection must take into account a variety of influences and conditions....
View details
What are the requirements for the cooling and heating temperature control equipment of the 500-liter
The 500-liter reaction kettle cooling and heating temperature control equipment is a dynamic temperature control system, a fully closed circulation pipeline, which can be automatically heated or cooled according to the process requirements. 1. A series of exothermic and endothermic reactions will occur during the polymerization reaction of the 500-liter reactor with cooling, heating and temperature-controlling equipment. 2. It can control one or more reactors at the same time. It is a large s...
View detailsHigh-low temperature control system with different configurations of high-pressure reactors
Different configurations of high pressure reactors, the quality of products brought by different manufacturers is not the same, but the points of attention are the same, you need to pay attention to it. 1. To be used at the designated location and follow the instructions for use. Check the test pressure, operating pressure, operating temperature and other conditions engraved on the main container, and use it within the allowable range of conditions. 2. The high-pressure reactor is a precision...
View details
Analysis of the work and industry application of the chiller
Although there are many different types of chillers, most use the same cooling principle. An important part of the process is the coolant or refrigerant, which holds more heat than water and helps maintain an efficient cooling process. Heat is removed from the coolant and released into the air. The concept of a cooler is based on the principle that cooling involves removing heat from a process and releasing it into the air. All chillers have condensers, compressors, expansion valves and evapo...
View details
Where can industrial heating circulators be useful?
The industrial heating circulator can provide a circulation device of cold source and heat source, and has a wide working range. It is used in the pharmaceutical, chemical, biological and other industries to provide heat and cold sources for reactors, tanks, etc., and can also be used for heating and cooling of other equipment. 1. Due to the heating and cooling effect of the industrial heating circulator, the material temperature can be kept constant (heating and cooling) during the producti...
View details
Why is it dangerous to use an enamel reactor?
The enamel layer of the enamel reaction kettle is easy to burst when it is cold and hot. Because the enamel layer is sintered on the surface of the enamel reaction kettle, and the enamel layer will melt when it exceeds 200 degrees Celsius, so the temperature of the material in the kettle is not allowed to exceed 200 degrees Celsius, so the enamel kettle has a temperature resistance limit of 200 degrees Celsius, and the temperature resistance rapidly becomes cold. Shock <110℃, thermal shoc...
View details
Several elements of the operation of -20 degree industrial cryogenic chiller
-20 degree industrial cryogenic chiller is a refrigeration equipment that provides low temperature chilled water. It is often used in production enterprises, such as chemical companies, pharmaceutical companies and other production processes, to provide stable chilled water to ensure effective production output. Therefore, the stable operation of the system is very important, and the simplification of operation is also an aspect that enterprises consider. Many customers have reported that the...
View details
