LNEYA Industrial Chillers Manufacturer Supplier -
News
Precautions for the use of molecular distillation cooling and heating temperature control
The SUNDI series of LNEYA refrigeration and heating temperature control system are used together to control the temperature in the process of molecular distillation. What should be paid attention to in use? If the molecular distillation method cannot pump up the vacuum, it is necessary to check whether the joints, the interface are sealed, the sealing ring and the sealing surface are effective; Cracks, chipping, damage phenomena. Each grinding port of the molecular distillation method, the s...
View details
Precautions for Leakage Inspection of Glycol Chiller
The main points about checking leakage of glycol chillerDuring the operation of the glycol chiller, it is critical that the refrigeration system does not leak. In order to avoid the leakage of refrigerant and other gases from the glycol chiller, the inspection of the welding quality is more important. First check whether the sealing performance of the weld is good. After adding refrigerant or nitrogen and allowing it to stabilize for a certain period of time, it can be tested with soapy wate...
View details
Operating instructions for the chiller, a laboratory process temperature control cycle system
The heat transfer medium of the laboratory process temperature control circulation system chiller uses oil and water. It uses electric heating to heat the heat transfer medium (heat transfer oil or water) that is forced to circulate in the pipeline under the action of the pump, and transfers heat energy through heat exchange. And can automatically adjust the temperature to achieve the purpose of accurate temperature control. 1. The installation is simple, the operation is simple, and no profe...
View details
How to Prolong the Service Life of Glycol Chiller System？
In order to extend the service life of your glycol chiller in industrial applications, please pay attention to the following points: 1. Use automobile grade antifreeze carefullyDo not use automobile grade or unqualified antifreeze. Because this glycol is not manufactured for industrial applications, it may cause a variety of problems and shorten the service life of your glycol chiller system. 2. Comply with local regulations.Experts have designed different rules and regulations according to t...
View details
Tips for shutting down the industrial chiller for temperature control of the reactor
Industrial chillers are equipped with a wide range of accessories and equipment. In actual use, it is necessary to provide regular rest time for industrial chillers. In order to maintain stable performance during long-term operation, users need to master the actual use needs. The method of shutting down the industrial chiller to reduce problems such as excessive wear and tear of the equipment. Method for shutting down the industrial chiller of the reactor temperature control unit: 1. When the...
View details
Solution to High and Low Pressure Fault of Water Cooled Chiller
The method to eliminate the shortcomings of high and low pressure of water-cooled chiller has always been a key point and difficulty in the industry, so it is very important to master the solutions to the shortcomings of high and low pressure of water-cooled chiller. The reason can be preliminarily identified as poor water quality, and corresponding impurities (leaves, weeds, etc.) enter the water distribution hole, which affects the heat dissipation of the cooling water tower. Next, I will i...
View details
Heat transfer oil chemical temperature control system product application
The heat transfer oil heating and cooling temperature control system is a device with heating or lowering at the same time, that is, when the temperature of the equipped glass reactor, rotary evaporator, extraction equipment and other devices needs to be raised or lowered rapidly to reach the set temperature. The heating and cooling of the equipment can be changed quickly, and the medium (heat-conducting oil) used is the same medium, which improves the disadvantage that two different instrume...
View details
Performance Characteristics of 30 HP Water Cooled Chiller
The 30p water cooled chiller is an industrial water chiller with a horsepower of 30 HP. The water-cooled industrial water chiller must rely on the cooling water tower for work, while the air-cooled industrial water chiller uses its own fan for cooling, which has some requirements for the environment: for example, ventilation, humidity and temperature cannot be higher than 40 ℃, air pH value, etc. Performance characteristics of 30p water-cooled industrial chiller: 1. The primary effect filter ...
View details
Instructions for the use of temperature control equipment for isolation reactors
The reaction kettle is a commonly used reactor in pharmaceutical and chemical production. The temperature control equipment of the isolated reaction kettle is realized by controlling two doors, namely the heating water valve and the cooling water valve. make it even temperature. The temperature of the isolation reaction kettle is controlled in the heating stage, the heating water valve is opened, and the coil pipe in the kettle is connected with heating water, so that the temperature rises, a...
View details
Cause Analysis of Poor Cooling Effect of Water Cooled Chiller
Water cooled chillers have been more and more widely used in all walks of life around us. Its main function is to provide industrial chilled water for equipment or products. The water temperature range can be adjusted according to users' needs, and its accuracy can be accurately controlled at ±1℃. However, in the process of using the chiller, some users encounter the situation that the temperature cannot drop. Let's analyze it together. The poor cooling effect of water cooled chillers is main...
View details
