LNEYA Industrial Chillers Manufacturer Supplier -
News
New Energy Car Battery Test Equipment For Battery Description
Lead-acid battery raw materials are easy to obtain, the price is relatively low, the high rate discharge performance is good, the temperature performance is good, can work in the environment of -40~+60 °C, suitable for float charging, long service life, no memory effect, used battery Easy to recycle, it is conducive to protecting the environment. However, the energy is low, generally 30~40Wh/kg, the service life is not as good as the Cd/Ni battery, and the manufacturing process is easy to pol...
View details
How To Solve The Electric Vehicle Motor Test Condensation Is Too High?
The condensing pressure of the electric vehicle motor test will increase, the compression function will increase, the cooling capacity will decrease, the cooling coefficient will decrease, and the energy consumption will increase. The reason for the rise of the condenser pressure may be that the condenser is too small. It is recommended to replace or increase the condensation. If the flow of cooling water is insufficient, it is recommended to increase the number of pumps running and increase ...
View details
Analysis of Common Faults in New Energy Vehicle Power Battery Test System
If the new energy vehicle power battery pack leaks, the general fault manifestation mode: the meter OK light does not light, the meter prompts to check the power system, the high voltage system leakage fault, disconnect the battery pack and the body all connections (positive and negative lead, sampling line interface) . Close the maintenance switch assembly, multimeter test battery pack parameters: closed maintenance switch, use a multimeter to measure the total voltage of the power battery ...
View detailsRelationship Between Poor Refrigeration Performance And Refrigerant In Low Temperature Industrial
The effect of the refrigeration system of the low-temperature industrial refrigerator is directly related to the refrigerant. Once the refrigerant leaks, the cooling capacity will be insufficient, so that the suction and exhaust pressures are relatively low, and the expansion valve and the evaporator are in operation. The balance pressure cannot be maintained. Therefore, if the refrigerant leaks from the low-temperature industrial refrigerator (group) is found, it is not rushed to fill the sy...
View details
The Inevitable Development Of New Energy Vehicle Battery Test Cooling Device
New energy vehicle battery test cooling device The energy crisis and environmental pollution have spawned the development of new energy vehicles. The key to the technology of new energy vehicles is the performance of power batteries. There are many types of power batteries, such as lead-acid batteries, nickel-cadmium batteries, nickel-metal hydride batteries, and lithium-ion batteries. Zinc air battery, fuel battery, etc., power battery pack is an important part of electric vehicles, directly...
View details
How To Vacuum The Ultra-Low Temperature Freezer Refrigeration System?
LNEYA ultra-low temperature freezer indoor and outdoor connection has been completed, observe the oil pump oil mark indication to see if there is enough oil, and then start the vacuum pump to see if it is normal. Then unscrew the large valve back cover nut and the fluorine injection nozzle nut, connect the pressure gauge low pressure, connect one end of the thimble to the refrigerant nozzle side, open the low pressure meter switch, vacuum, and quickly show that the vacuum is completed. It may...
View details
Take You To Know The Performance Of LNEYA Industrial Freezer Accessories
Temperature Controller The temperature controller is used for control or protection of the unit. When the temperature reaches the set value, the switch automatically cuts off (or turns on) the circuit. In our products, temperature control is often used, water tank temperature to control the unit's start and stop. Some still require a temperature controller like antifreeze. The electromagnetic valve Shut off the system circuit when the compressor is stopped, to avoid liquid shock when the LNEY...
View details
What Are The Characteristics Of The Reactor Heating System?
Wuxi Guanya LNEYA reactor heating system The liquid circulation of the whole system is closed, the system has an expansion vessel, the expansion vessel and the liquid circulation are adiabatic, do not participate in the liquid circulation, only the mechanical connection, regardless of the temperature of the liquid circulation is high temperature Or the medium in the low temperature expansion vessel is below 60 degrees. The whole liquid circulation is a closed system. There is no water vapor a...
View details
How To Choose The Equipment For The Reactor?
The choice of equipment for the reactor needs to be measured by the following points: 1. Heating method: Generally, the electric heating should be greater than or equal to 3 tons, and in the case of the outer half pipe; less than or equal to 3 tons can be heated by water or steam, the temperature is less than or equal to 90 degrees; and the heat transfer oil can be 130 -280 degrees between. 2. Cooling method: generally normal temperature is 25 degrees or more; chilled water is between 5-25 d...
View details
Detailed Electric Vehicle Motor Test And Test System
New energy vehicles need to have power system, drive system, control system integration test capability, and electronic electronic control test system function test capability. For component manufacturers, this test development capability is also the most important, electric vehicle. The motor test test items include general performance, environmental test, temperature rise test, motor torque characteristics and efficiency tests. The common motor test system for new energy vehicles has a dyna...
View details
