Why does the glass reactor need a heating refrigeration circulator in use?
The glass vacuum reactor is of double-layer glass design. The inner layer is filled with reaction solvent for stirring reaction, and the interlayer can be connected with different cold and heat sources (freezing liquid, hot water or hot oil) for circulating heating or cooling reaction. Under the condition of constant temperature, the stirring reaction can be carried out under atmospheric pressure or pressure dependent conditions according to the use requirements in a closed glass reactor. It can do the reflux and distillation of the reaction solution. It is an ideal pilot and production equipment for modern fine chemical plants, biopharmaceuticals and new material synthesis.
The glass interlayer interface is connected with hot oil for circulation, which can be used for reaction under high temperature; The reaction at low temperature can be carried out by adding coolant. It can also be connected with water, which can quickly take away the reaction heat.
The interlayer inlet and outlet on the glass reactor can be heated with hot oil and low-temperature reaction with coolant. If steam is used for heating, it shall not exceed 0.5k-1k. (Note: try not to use pressure steam heating).
High temperature circulator shall be used for heating and low temperature circulator shall be used for refrigeration. Before use, add reaction materials for heating or cooling. Avoid that there is no material in the reactor and heating or cooling is carried out in the interlayer.
If the reactor needs heating or cooling, the high-temperature circulator or low-temperature circulator should be used for circulating heating or cooling. It is forbidden to heat and recycle or refrigeration and recycle first.
To cool down the reactor at high temperature, first turn off the heat switch of the high temperature circulator (the circulation switch remains on), add water or oil, and gradually cool down with the temperature in the circulator. Do not pump out the heated substances in the interlayer of the reactor, and directly cool down the circulating new substances.
Lneya heating refrigeration circulator can realize dynamic temperature control from – 45 ℃ to 250 ℃, and has heating and refrigeration function. It is equipped with two LED display controllers, which can display the set temperature value, actual value and over temperature alarm value at the same time. The product is efficient and fast, and the liquid filling is simple. The whole liquid circulation is a closed system without oil mist and water absorption, which ensures the safety of the experiment and the service life of the heat conduction medium. International brand compressor and circulating pump are adopted, with stable performance and reliable quality; The product has self diagnosis function, refrigerator overload protection, high-voltage pressure switch, overload relay, thermal protection device and other safety protection functions. It ensures the machine itself and the glass reactor, and improves the quality of reaction results and the service life of the equipment. Contact us for details sales@lneya.com obtain.
Related recommendations
-
The Screw Chiller Factory With Noise Should Be Checked And Repaired In Time
455Before we use an industrial screw chiller factory, we will check all aspects of it, such as parts inspection, configuration, noise, and so on. What should I do if there is noise in the screw chiller during use? Do I need someone to repair it? The ...
View details -
Temperature control system for controlling integrated circuit chip test temperature
425Advances in semiconductor technology have led to the development of next-generation electronic devices such as integrated circuits, which have more and more active components, higher circuit complexity, smaller area, and tighter wiring. These attr...
View details -
Is it right to extend battery life by lowering the ambient temperature?
399The battery can work in a wide temperature range, but this does not allow the battery to be charged under high temperature conditions. The charging process is more delicate than the discharging process, and extreme care must be taken. Extreme cold...
View details -
Temperature control of integrated circuit/chip wafer quality and reliability test items
530The most basic part of making a chip is design-tape-package-test. The chip cost structure is generally 20% of labor cost, 40% of tape, 35% of package, and 5% of test. The test is actually the most in all aspects of the chip. "Cheap" step, but the...
View details