KRY -40℃~100℃ 1&2S

Vehicle antifreeze test temperature simulation

KRY -40℃~100℃ Vehicle/Battery Water Chillers

Heating Power10kW~38kW
Cooling capacity2.5kW~60kW
Power range17kW~81kW
Temperature accuracy±0.5℃
Flow rate output1～40 L/min
RefrigerantR404A/R507C/R125/N40
Weight360KG~1750KG

dynamic temperature control system KRY -40℃~100℃vehicle test chiller

INQUIRY

Product data download

manual.pdf

Temperature range is -40℃~+100℃, which can be extended to +135℃ according to the actual situation, and the temperature control accuracy is plus or minus 0.5℃. The equipment can control the flow and pressure independently while controlling the temperature, and different customized solutions are required for simultaneous control.

The tested object is attached to a test platform adapter.
The inside of the part was cooled and heated by an aqueous solution of ethylene glycol.
The test component needs to go through a specific temperature profile and record changes in temperature.
Temperature variations typically range from -40 ℃to 100 ℃. (expandable to 150 ℃)
When performing a tolerance test, it usually takes an infinite loop.

Parameters Detailed

Model	Synbol Unit	KRY-475/475W/2S	KRY-4A15W/2S	KRY-4A25W/2S	KRY-4A38W/2S	KRY-4A60W/2S
Temp Range	℃	-40℃～+100℃
Flow rate output	L/min	1～20 L/min	1～20 L/min	1～20 L/min	1～40 L/min	1～40 L/min
Flow rate accuracy	L/min	±0.2 L/min
Heating power	kW	7.5kW	10kW	15kW	25kW	38kW
Cooling Capacity	100℃	10kW	15kW	25kW	38kW	60kW
	200℃	10kW	15kW	25kW	38kW	60kW
	0℃	10kW	15kW	25kW	38kW	60kW
	-35℃	2.5kW	4kW	6.5kW	10kW	15kW
Refrigerant		R404A/R507C/R125/N40
Power 380V50HZ	kW max	16.5kW	24kW max	36kW max	56kW max	81kW max
Dimension(A) cm	(A) cm	70100175	80120185	100150185	120180205	145205225
Weight (water cooling)	KG	360KG	450KG	750KG	1000KG	1700KG

Model	Synbol Unit	KRY-455/455W	KRY-475	KRY-4A10/4A10W	KRY-4A15/4A15W	KRY-4A25/4A25W	KRY-4A38W	KRY-4A60W
Temp Range	℃	-40℃～+100℃
Flow rate output	L/min	1～10 L/min	1～25 L/min	1～25 L/min	1～40 L/min	1～40 L/min	5～50 L/min	5～50L/min
Flow rate accuracy	L/min	±0.2 L/min
Heating power	kW	5.5kW	7.5kW	10kW	10kW/Optional 15kW	15kW/Optional 25kW	25kW/Optional 38kW	38kW/Optional 60kW
Cooling Capacity	100℃	5.5kW	7.5kW	10kW	15kW	25kW	38kW	60kW
	200℃	5.5kW	7.5kW	10kW	15kW	25kW	38kW	60kW
	0℃	5.5kW	7.5kW	10kW	15kW	25kW	38kW	60kW
	-35℃	1.2kW	1.8kW	2.5kW	4kW	6.5kW	10kW	15kW
Refrigerant		R404A/ R507C
Power 380V50HZ	kW max	12kW max	15kW max	20kW max	29kW max	42kW max	58kW max	84kW max
Dimension(W) cm	(W) cm	5595175	5595175	5595175	70100175	80120185	100150185	145205205
Dimension(A) cm	(A) cm	5595175	5595175	70100175	80120185	100150185
Weight (water cooling)	KG	250KG	280KG	320KG	360KG	620KG	890KG	1300KG

Control Mode	Feedback PID + Our special dynamic control calculation, PLC controller
Temp. control	Process temp. control and jacket temp. control model
Temp. difference	Set or control the temperature difference between jacket oil and raw material process
Program Editor	10 programs, each program can edit 40 steps
Communication Portocol	MODBUS RTU Protocol, RS485 interface
Material temp. feedback	PT100 OR 4～20mA or communication（normal: PT100)
Temp. feedback	The temp. of three points: the inlet and outlet of equipment,reactor material temp.(external temp. sensor)
Expansion valve	Emerson thermal expansion valve/danfoss thermal expansion valve
Evaporator	DANFOSS/KAORI Plate heat exchanger
Operation Panel	7-inch touch screen，show temp curve\EXCEL data output
Safety protection	Self-diagnosis function; freezer overload protection; high pressure switch, overload relay,thermal protection device, liquid low level protection, high temperature protection and temperature fault protection.
Closed circulation system	The whole system is full closed circulation, there is no oil mist at high temperature and no water vapor at low temperature, pressure do not rise up when system is running. The system will supply oil automatically at low temperature.
Refrigerant	R404A/R507C/R125/N40 All four refrigerants are available

Product Description

For the power battery charging management, the precision temperature control device for testing the permanent magnet synchronous motor, the switched reluctance motor, the asynchronous motor and its controller can realize the local + remote control mode through the liquid crystal controller panel;

With automatic fault protection function, it can output corresponding signals to ensure the safety of equipment. The main parts are all international brands, quality assurance, high-pressure electrostatic spray treatment on the surface, and auxiliary equipment can be added according to specific needs.