Answer: For the chiller, if it is operated at high temperature, a large amount of cold air in the industrial chiller may be severely lost. After the sealing effect of the use environment, through timely and effective heat preservation, the operating efficiency of industrial chillers is stable, which can improve the environmental cooling efficiency of the unit and reduce energy consumption.
In order to maintain the safe and stable operation of the chiller, the chiller must be comprehensively insulated. The reason why heat insulation is important is that heat insulation can control most of the heat outside the operating environment of the chiller. It is recommended that the high temperature environment has an impact on the various components of the chiller and poses a threat to the safe operation of the equipment. Therefore, it is very important to heat the chiller. For the chiller, if it is in a high temperature operation state, it may cause serious loss of cold air in the chiller.
After the sealing effect of the use environment, the chiller can be effectively insulated in time, and its stable operation. The operating efficiency of the chiller is stable, which can improve the environmental cooling efficiency of the chiller and reduce the energy consumption of the chiller. Professionals must be hired to insulate the chiller.
Many locations of the internal components of the chiller can be insulated, but many locations cannot be insulated. Therefore, when the equipment is insulated, it must be carried out under the guidance of professionals. The better the heat insulation effect, the higher the operational safety of the chiller, which can reduce the failure probability of the chiller and prolong the service life of the chiller. It is very helpful for enterprises to use chillers for a long time and stably.
Note: When completing the heat preservation treatment of the chiller, in order to obtain a better treatment effect, the company needs to choose the heat preservation material.
Due to the different costs of different insulation materials, choose products with low prices and good insulation effects as much as possible to reduce the cost of insulation of the chiller. Only the thermal insulation materials used in the chiller can successfully complete the entire thermal insulation process, provide a more comfortable operating environment for the chiller, and avoid the impact of various failures on the chiller.
For the safe and stable operation of the chiller, the chiller needs to be comprehensively insulated before use. Whether it is the pipes or accessories of the industrial chiller, as long as the thermal insulation treatment can be completed, comprehensive thermal insulation will be carried out to improve the operational safety of the chiller. Reduce the probability of various failures of the chiller, and meet the needs of enterprises for the efficient operation of the chiller with higher operating efficiency.
The refrigerant absorbs the heat of the cooling object in the evaporator and evaporates it into vapor. The compressor continuously extracts and compresses the generated vapor from the evaporator. The compressed high-temperature and high-pressure steam is sent to the condenser to release heat and condense into a high-pressure liquid, cooling medium (such as water, air, etc.). ). After being decompressed by the throttling mechanism, it enters the evaporator, vaporizes again, absorbs the heat of the cooled object, and circulates repeatedly. During the heating process, the refrigerant changes its flow direction through the four-way valve, which is exactly the opposite of the flow direction during the cooling process. The refrigerant first passes through the evaporator, then returns to the condenser, and then returns to the compressor.
I believe you should already understand the relevant content. If you still don’t understand, you can consult our LNEYA technical staff!