LNEYA Industrial Chillers Manufacturer Supplier -
Left and right multi-layer test chamber
-80℃~150℃- Heating rate of preheating zone(No load) 5 ℃/min (customizable for 10-25 ℃)
- Cooling rate of pre cooling zone (No load) 2 ℃/min (customizable for 5-25 ℃)
- Pre cooling area Pre cooling range-10℃~-55℃
- Preheating area preheating range+60℃~+180℃
- Temperature fluctuation≤1℃
Configuration Details
| Model | GD-518-2-C-DC | |
| Inner box size (W*H*D)cm |
Left cavity (cm) | 60*69*147.5 |
| Right cavity (cm) | 60*69*147.5 | |
| Temperature range | -70℃~150℃ | |
| Heating rate | (No load) -40℃→+125℃ 1℃/min (5~25℃ can be customized) | |
| Cooling rate | (No load) 125℃→-40℃ 1℃/min (5~25℃ can be customized) | |
| Temperature uniformity | ≤±1℃ (no load) | |
| Temperature accuracy | ≤±0.1℃ | |
| Refrigerant | R404A/R23 | |
| Heater | Electric heating | |
| Air-cooled condenser | Fin heat exchanger | |
| Water-cooled condenser | Plate/jacket/shell and tube heat exchanger | |
| Air circulation | Extended shaft motor, stainless steel centrifugal fan blades | |
| Cooling method | Cascade refrigeration | |
| Compressor | Brand inverter compressor | |
| Control method | Segmented fuzzy PID algorithm control | |
| Communication protocol interface | TCP/RS485 (CAN can be customized) | |
| Operation panel | 7-inch color touch screen, temperature curve display\EXCEL data export | |
| Sensor | PT100A grade platinum resistor | |
| Protective devices | Heater dual temperature protection, refrigeration system protection and electrical overcurrent and overload protection, etc. | |
| Outer box size (W*H*D)cm |
357*238*175 | |
| Power supply | 380V 50HZ | |
| Insulation material | Glass fiber wool & polyurethane | |
| Inner box material | SUS304 stainless steel | |
| Outer box material | Cold rolled steel plate + plastic spraying | |
| Execution meets standards | GB/T 2423.1;GB/T 2423.2;GB/T 2423.3;GB/T 2423.4;GB/T 5170.2;GB/T 5170.5;GB/T 11158;GB/T 10589;GB/T 10592; GB/T 10586;IEC 60068-3-5 | |
Send us a message about the product
You may also be interested in these products
Walk-in Test Chamber
APPLICATIONS Suitable for low temperature, high temperature, high and low temperature changes, constant damp heat, high and low temperature alternating damp heat and other tests of complete machines or large components. The size and fun…
Two-door Shock Test Chamber
APPLICATIONS When conducting high and low temperature shock tests, the test basket is mobile, mainly relying on the test basket to move up and down in the high temperature zone and the low temperature zone to complete the high and low t…
Left & Right Multi-layer Test Chamber
APPLICATIONS Left and right multi-layer test chambers provide temperature range -80℃~+150℃ wide temperature range temperature control, no-load temperature uniformity ±1℃, temperature accuracy ±0.1℃, to meet the needs of diverse scenario…
GD Series Rapid Temperature Change Test Chamber
APPLICATIONS It is suitable for environmental stress screening tests. By performing environmental stress screening on products, it accelerates the discovery of product design defects and improves product reliability. Many industrial fie…
loading…
已经是到最后一篇内容了！
