KRYCH Series Battery Pack Test Chamber

APPLICATIONS

The power battery temperature cycle chamber is a high and low temperature test device for power battery samples. It is currently mainly used in the new energy battery industry. It can directly complete high and low temperature charging and discharging, or high and low temperature storage, for battery cells, modules, and PACKs in the test box. In the event of battery failure, explosion-proof pressure relief and fire protection devices are added.

Get support

Inquiry @ Email

Product Features

FirstTemperature | flow | pressure control accuracy, ±0.1℃, ±0.2L/min

SecondRefrigeration system adopts frequency conversion control, efficient operation, energy saving of more than 200%;

ThirdUpper and lower double-layer box design, the box contains antifreeze battery cooling system, the control and test systems of the two-layer box are completely independent;

FourthInsulation layer is made of insulation materials with low thermal conductivity and high temperature resistant materials, with a thickness of 100mm, which can meet the long-term high and low temperature impact requirements of -40℃ to 100℃

Product Parameters

GD series & KRYCH series -40℃～100℃

Model		GD-9000-2-B1-KRYCH-4A15W		GD-9000-2-B1-KRYCH-475W		GD-9000-2-B1-KRYCH-4A10W		GD-1000-B1-KRYCH-475
Temperature range		-40℃～100℃ Antifreeze	-40℃～100℃ Test Chamber	-40℃～100℃ Antifreeze	-40℃～100℃ Test Chamber	-40℃～100℃ Antifreeze	-40℃～100℃ Test Chamber	-40℃～100℃ Antifreeze	-40℃～100℃ Test Chamber
Antifreeze flow control		1L/min~40L/min		1L/min~25L/min		1L/min~25L/min		1L/min~10L/min
		±0.2L/min		±0.2L/min		±0.2L/min		±0.2L/min
Antifreeze pressure		Measure and display the inlet and outlet pressure, as well as the pressure displayed on the touch screen
Chamber(WHD)	Upper cavity cm	220322120		220322120		220322120		Single cavity:100100100
	Lower cavitycm	220322110		220322110		220322110
Heating power		15kW	14kW	7.5kW	14kW	10kW	14kW	7.5kW	6kW
Cooling capacity Antifreeze	135℃	15kW		7.5kW		10KW		7.5kW
	20°℃	15kW		7.5kW		10KW		7.5kW
	0℃	15kW		7.5kW		10KW		7.5kW
	-20℃	10kW		4.5kW		6KW		4.5kW
	-35℃	4kW		1.8kW		2.5KW		1.8kW
Chamber	Heating rate	25～+100℃≥±2℃/Min （No load, average throughout the entire process）（Customizable at 5~25℃）
	Cooling rate	25～-40℃≥1℃/Min（No load, average throughout the entire process）（Customizable at 5~25℃）
Antifreeze temp control accuracy		±0.1℃
Temperature uniformity		≤±1℃(unloaded)
Circulating air volume		5000m³/h						2500m³/h
Control mode		Segmented Fuzzy PID Algorithm Control
Communication protocol		CAN/TCP/RS485
Temperature feedback		Internal temperature of equipment enclosure, condensation temperature of refrigeration system, suction temperature of compressor, cooling water temperature (for water-cooled equipment)
High temp cooling module		Can cool down from a high temperature of 100 ℃
Circulating pump		Magnetic drive pump
Compressor		Brand variable frequency compressor
Evaporator		Plate/fin heat exchanger
Refrigeration accessories		Emerson/Danfoss brand dry filters, oil separators, etc
Throttle method		Electronic expansion valve
Refrigerant		R125/R404A
Safety protection		Phase sequence failure protector, freezer overload protection; High pressure switch, overload relay, thermal protection device and other safety protection functions.
water-cooled condenser		Shell and tube heat exchanger
Operation panel		10 inch color touch screen						7 inch color touch screen
Antifreeze interface		ZG3/4						ZG3/8
Cooling water 20 ℃		25m³/H		20m³/H		20m³/H		7m³/H
Dimension cm		240560285		240560285		240560285		120205205
Bearing		1500kg		1500kg		1500kg		120kg
Weight		4600kg		4200kg		4200kg		600kg
Power supply		380V 50HZ
Insulation material		Glass fiber cotton&polyurethane
Inner box material		SUS304 stainless steel brushed plate
External materia		Cold rolled steel plate+spray coating
Execution standards		GB/T 2423.1;GB/T 2423.2;GB/T 2423.3;GB/T 2423.4;GB/T 5170.2;GB/T 5170.5;GB/T 11158;GB/T 10589;GB/T 10592; GB/T 10586;IEC 60068

APPLICATIONS

Temperature control unit of semiconductor FAB process

Semiconductor manufacturing is a process with extremely high environmental requirements, and many process steps are very sensitive to temperature.
Precise temperature control can ensure uniform thickness and accurate composition of deposited films, thereby improving chip performance and yield.

Learn more

Temperature Control Solutions for Semiconductor packaging and testing process

Semiconductor packaging and testing process is a key link in the semiconductor production process, including wafer testing, chip packaging and post-packaging testing. This process requires not only a high degree of accuracy and reliability, but also strict temperature control to ensure product quality and performance.

Learn more>

contact us

Submit your request to us and we will contact you within 24 hours