The integrated semiconductor industry has developed rapidly in the past two years, which has driven other industries around it. The chip thermal test system is one of the products. In order to avoid machine failures in the LED liquid crystal display thermal test system, please provide a power supply within the rated voltage range. In order to prevent electric shock or malfunction and malfunction, please do not turn on the power before installation and wiring are completed.

The thermal test system for LED liquid crystal display is non-explosion-proof equipment, please do not use it in an environment with bad gas. Please try not to open the door of the test chamber when the equipment is working. Opening it at high temperature may cause malfunction to the operator, and opening it at low temperature may cause damage to the staff, and may cause the evaporator to freeze and affect the cooling effect. If you must open the door of the test chamber, please do the relevant protection work.

LED liquid crystal display thermal test system prohibits unauthorized disassembly, processing, modification or repair of LED liquid crystal display high and low temperature test, otherwise there will be a risk of abnormal operation, electric shock or fire. The ventilation holes of the high and low temperature test body of the LED LCD display should be kept unobstructed to avoid malfunctions, abnormal actions, and reduced life. If the machine is damaged or deformed when unpacking, please do not use it with electricity.

Be careful not to let dust, thread ends, iron filings or other objects enter during installation, otherwise malfunction or malfunction may occur. The wiring must be correct and must be grounded. Failure to ground may cause electric shock, wrong action accidents, abnormal display or large errors in measurement. Check the terminal screws and fixing frame regularly, please do not use them when they are loose. During the operation of the instrument, the power input terminal cover must be installed on the terminal board to prevent electric shock.

LED liquid crystal display thermal test system instrument is in operation, before modifying the setting, signal output, starting, stopping, etc., safety should be fully considered. Wrong operation will damage the working equipment or cause malfunction. Please wipe with a dry cloth. Do not use alcohol, gasoline or other organic solvents. Do not splash water on the meter. If the meter is immersed in water, please stop using it immediately, otherwise there is a risk of electric leakage, electric shock or fire. The internal parts of the instrument have a certain life span. In order to use the instrument continuously and safely, please perform regular maintenance and maintenance. If it is scrap equipment, please treat it as industrial waste.

LNEYA has a professional after-sales team. Users can contact personnel for on-site visits or obtain online solutions when they encounter LED liquid crystal display thermal test system failures.