Precautions for the Placement of Industrial Air Cooled Chiller

The quality and use of industrial air cooled chillers are very important. At the same time, the user operation cannot ignore the position placement. Only the correct position placement and high-quality equipment can achieve high-efficiency operating conditions and temperature control results.

Before turning on the power of the industrial air cooled water chiller, check whether the voltage specified on the nameplate is the same as the household voltage. The same can be used. Separate power lines and special sockets must be arranged for the industrial air cooled water chiller system. It cannot be used with other electrical appliances. The same socket, otherwise it will cause bad accidents, the grounding device should be installed, and then the industrial-grade air cooled chiller system should be energized.

Industrial air cooled water chiller systems are placed in places with low humidity. Do not place heavy objects or excessive sundries, especially other electrical appliances, so as not to cause interference.

Place it in a well-ventilated place. The back should be more than 10 cm away from the wall, the top should have a height of more than 30 cm, and there should be no excessive debris around.

Place it on a stable ground, otherwise it will vibrate and make a lot of noise when the compressor is started. This will shorten the service life of Oxue’s industrial air cooled water chiller system for a long time.

Keep away from open flames and high temperatures. Keep it away from heat sources such as stoves and radiators, and avoid direct sunlight. This is conducive to the heat dissipation of industrial-grade air cooled chiller systems.

Don’t ignore these precautions!