Maintenance of high and low temperature circulator in the pharmaceutical industry
The high and low temperature circulator in the pharmaceutical industry is also an increasingly common temperature control equipment in all walks of life. It is inevitable that the equipment needs to be maintained after long-term use. How to maintain it to extend its service life?

For the maintenance of the air-cooled high and low temperature circulator in the pharmaceutical industry, the aspects that need attention:
①Please keep the surface of the radiator coil of the high and low temperature circulator in the pharmaceutical industry clean to ensure that the surrounding air is circulating and the temperature is low;
②Regularly clean the dirt on the coil to ensure a good heat exchange effect;
③If the high and low temperature circulator in the pharmaceutical industry has been used for more than six months, or the high and low pressure switches frequently fail, or the cooling capacity is reduced, please arrange for personnel to clean the condenser;
④If the above instructions are repaired for many times, the fault alarm of the high and low temperature circulator in the pharmaceutical industry continues to sound, and the maintenance personnel must be asked to repair the high and low temperature circulator in the pharmaceutical industry;
⑤The air-cooled pharmaceutical industry high and low temperature circulator unit should be turned on according to the correct rotation of the fan. If it can be turned on and run in the forward direction, it means that the power connection has been reversed and the phase sequence must be replaced before starting. The setting values of various protection devices of this machine have been adjusted by the factory, and users should not change them at will.
When the device fails and an alarm is issued and shut down, please press the stop button of the device first, and then check the cause of the failure. Before troubleshooting, do not forcibly start the device. If it is not an emergency, it is not allowed to turn off the equipment by cutting off the main power supply.
In daily use, the high and low temperature circulator in the pharmaceutical industry should be regularly arranged for maintenance workbenches. Regular maintenance can make the high and low temperature circulator in the pharmaceutical industry have a longer service life.
Related recommendations
-
Application of Chiller
978With the rapid development of modern industrial technology, in order to improve production efficiency, improve product quality and reduce production costs, the requirement of temperature control in production process is becoming higher and higher....
View details -
The importance of temperature cycle control heating and cooling in the production of API
1062China has become the world's largest supply market for APIs. Most of the APIs and intermediates required by foreign manufacturers are purchased in my country. The drug outsourcing process of most of its preparation products, the production process...
View details -
Micro-channel reactor thermostatically controlled air-cooled chiller compressor troubleshooting meth
1052The air-cooled chiller is a temperaturecontrol device that is widely used in the microchannel reactor industry. WuxiGuanya LNEYA has produced a cold and heat source thermostatically controlledair-cooled chiller for the microchannel reactor indu...
View details -
Ultra-low temperature bearing cooling equipment Shrink Fit Bearings and Bushings and Pins
1111For the metallurgical industry, the oil pressure system of precision machine tools must use refrigeration to control the oil temperature to stabilize the oil film viscosity so that the machine tool can work normally. If applied to steel products, ...
View details