SEARCH
How to maintain stable performance of biopharmaceutical laboratory oil cooler?

1. A suitable working environment to prevent various failures of the oil cooler in the biopharmaceutical laboratory needs to provide a better operating environment for the equipment. Keep the environment clean and tidy, reduce the impact of various types of dust, thereby improving the stability of heat dissipation, improving the cooling performance, reducing the ambient temperature in a shorter period of time, and reducing the energy consumption of equipment used by enterprises.
2. Maintain a low failure rate, and carry out meticulous maintenance and maintenance on a daily basis. At the same time, operators are required to complete the opening and closing of the equipment according to the use steps required by the manufacturer, so as to avoid wrong operation behaviors and lead to the use of oil coolers in biopharmaceutical laboratories. Life is affected, and even various failures continue to occur.
3. Timely maintenance of minor faults requires the company to timely and effectively complete the entire maintenance process for the failure of the oil cooler in the biopharmaceutical laboratory to reduce the impact of minor faults.
4. It is strictly forbidden to short-circuit the water flow switch circuit during the use of the equipment. Short-circuiting may cause the equipment pipes to freeze and damage, which will affect the normal use of the equipment.
5. In actual operation, operators are required to record various operating data of the equipment on time, analyze regularly, find problems through data, and eliminate hidden dangers for problems.
6. When an alarm occurs, the meaning of the alarm should be judged in time. If it cannot be solved by itself, it should be reported to the refrigerator manufacturer for repair to avoid the expansion of the fault range and the overrun of the maintenance cost.
7. It is strictly forbidden to short-circuit the water flow switch circuit during the use of the equipment. Short-circuiting may cause the equipment pipes to freeze and damage, which will affect the normal use of the equipment.
8. In actual operation, operators are required to record various operating data of the equipment on time, analyze regularly, find problems through data, and eliminate hidden dangers for problems.
In addition to the above methods, the operation management of the oil cooler in the biopharmaceutical laboratory is also very critical. Mastering the scientific operation procedures, maintenance and repair methods of the equipment, as well as the management of the maintenance, transformation and disposal of the refrigeration unit can ensure that the equipment is always in good condition. operating status.
Related recommendations
-
Specific operation analysis How to dehumidify when using industrial freezer
179In the process of using industrial freezers, there may be some moisture in the refrigeration system. Therefore, the dehumidification of industrial freezers is very important, so how to dehumidify? When dehumidifying, users who purchase in...
View Details -
-
Operation LNEYA high and low temperature cycle machine note
204LNEYA high and low temperature cycle machine uses mechanical refrigeration to obtain low temperature heating tube heating to obtain high temperature. It is used with various glass reactors and reactors. What should be paid attention to whe...
View Details -
Application Note of Low Temperature Refrigerator for Cold Shrink Assembly of Automobile Engine Parts
260Engine assembly is carried out in a low-temperature environment below minus 30°C in a low-temperature refrigerator. The mainstream automobile engine manufacturers have their own low-temperature assembly workshops. Engines assembled in a lo...
View Details