en_USEnglish
French
French
German
German
Italian
Italian
Russian
Russian
Japanese
Japanese
Korean
Korean
Portuguese
Portuguese
Spanish
Spanish
Chinese
Chinese

Search the whole station

Vehicle chiller

KRY -20℃～100℃

The size external circulation pipe line is DN15 or DN20, do not throttle, which will increase the circulation pump load,pipe
need to be insulated, and adopt rubber and plastic insulation pipe which can afford high temp, liquid low level protection

Send us about your inquiry
Cooling capacity 25kW~60kW
Circulation Pump MAX
1~40L/min 0.2~2.5bar
Temperature accuracy ±0.3℃
Power AC380V/ AC460V

KRY -20~100 is a low-temperature series vehicle chiller. Its temperature control range is -20℃~100℃ and its temperature control accuracy is around 0.3℃. The flow output range is from 1L/min to 40L/min. Different models have different flow output range. The flow control accuracy is around 0.2L/min. This series has water cooled type and air cooled type. This series also supports non-standard customization.

Vehicle chiller

-20°C

lowest

100°C

Highest

±0.3°C

Temperature control accuracy


Model KRY-255
KRY-255W		 KRY-275
KRY-275W		 KRY-2A10
KRY-2A10W		 KRY-2A15
KRY-2A15W		 KRY-2A25
KRY-2A25W		 KRY-2A38W
Temp Range  -20℃～+100℃
Flow rate output 1～15 L/min 1～25 L/min 1～30 L/min 1～40 L/min 1～40 L/min 1～40 L/min
Flow rate accuracy ±0.2 L/min ±0.2 L/min ±0.2 L/min ±0.2 L/min ±0.2 L/min ±0.2 L/min
Heating capacity 5.5kW 7.5kW 10kW 15kW 25kW 38kW
Cooling capacity 100℃ 5.5kW 7.5kW 10kW 15kW 25kW 38kW
20℃ 5.5kW 7.5kW 10kW 15kW 25kW 38kW
0℃ 5.5kW 7.5kW 10kW 15kW 25kW 38kW
-15℃ 2.8kW 3.8kW 4.6kW 7kW 12kW 16kW
Water-cooled type W at 25℃ 1900L/H
ZG3/4		 2500L/H
ZG3/4		 3000L/H
ZG1		 4000L/H
ZG1		 6000L/H
DN32		 9000L/H
DN40
Power 380V50HZ 11kW 14kW 19kW 23kW 31kW 45kW
Dimension cm 55*100*175 55*100*175 70*100*175 80*120*185 100*150*185 100*150*185

Temperature feedback

Temperature feedback PT100 (inlet temperature, outlet temperature)


Compressor

Highly, Mitsubishi, Panasonic and other compressors


Communication protocol

MODBUS RTU protocol RS485 interface



features of Vehicle chiller

  • The interior of pipeline：internal structure of the pipeline Lneya’s automotive chiller uses is made of stainless steel SUS304, copper, ceramic, silicon carbide, silicone sealant and PTFE.
  • Touch Screen: The multifunctional image display presents comprehensive important data information, such as data, lines and annotations. The operation safety status is continuously monitored and visualized on the touch screen.
  • Shell Material： uses cold-rolled sheet powder coating RAL7035. The color of our automotive chiller is a light greyish-brown tone, taking into account both the requirements for rust prevention and aesthetics.
Send Your Inquiry Now →

LNEYA Applications

suitable for achieving temperature control during the component testing phase of new energy vehicles, especially the temperature control of the battery package.
Adhesive testing
Adhesive testing
Adhesives must maintain the required elasticity and strength functional range throughout the temperature window
Mechanical stress testing
Mechanical stress testing
Environmental simulation using temperature control systems within the test bench
Test bench
Test bench
Highly dynamic temperature control systems for material and component testing
Pumping system testing
Pumping system testing
Temperature simulation keeps gaskets leak-free over a wide dynamic range of pressure and temperature, and pumping systems operate reliably regardless of temperature and viscosity
Battery testing
Battery testing
Simulate external environmental conditions or replace internal systems in a climate chamber.

ALL automotive chillers model

KRY -40℃~100℃
battery chillers

water-cooling & air-cooling
Heating capacity 2.5kW~60kW
Cooling capacity 1.2kW~60kW
Temp accuracy ±0.3℃

Learn more

KRYZ -40℃~100℃
antifreeze cooler

water-cooling & air-cooling
Heating capacity 2.5kW~38kW
Cooling capacity 1.8kW~60kW
Temp accuracy ±0.3℃

Learn more

KRY -40℃~100℃ Multi-channel
liquid cooling chiller

water-cooling & air-cooling
Heating capacity 7.5kW~25kW
Cooling capacity 1.8kW~25kW
Temp accuracy ±0.1℃

Learn more

KRYZ -40℃~50℃
battery pack cooling system

Cooling capacity 0.5kW~10kW
Heating capacity 0.5kW~10kW
Temp accuracy ±0.5℃


Learn more

KRYO 0℃~160℃
oil chiller

Heating power 15kW~38kW
Cooling capacity 12kW~38kW
Flow rate accuracy ±0.2L/min
Temp accuracy ±0.3℃

Learn more

You can trust our portable chiller factory

We are a very powerful chiller supplier with our own factory and more than 20 years of experience in the field of temperature control

Our excellent workshop technology, strong factory manufacturing capabilities, and technical support and maintenance service coverage determine: whether you need fast cooling, high efficiency and energy saving, environmental protection, or other application scenarios such as temperature control, flow control, pressure control, etc., we have rich experience to help you determine the chiller that best suits you.

With rich experience and worry-free pre-sales and after-sales services, customers can trust us to provide unparalleled help to maintain the optimal performance and service life of the chiller. This further promotes the overall success and efficiency of their operations.

Contact us for customized recirculating chiller solutions →

Global service

Served more than 30,000 customers.
Exported to more than 20 countries.

Certification patents

Has obtained CE certification, SGS certification, ISO certification.

After-sales service

Provide comprehensive technical training.
With 24/7 solutions.

Professional team

Founded in 2010, with 15 years of industry experience.
20% of employees are technicians.

Quality control

Visual inspection.
Performance test.
Electrical safety test.

Get in touch with our Vehicle chiller

Our equipment is equipped with a multi-functional alarm system. When a fault occurs, it will give a direct beeping alarm. The cause of the fault will be displayed on the touch screen, which is convenient for maintenance.

To enhance the operational convenience of the equipment and minimize the hassle during use, KRY series automotive chiller is equipped with a built-in self-priming pump. All you need to do is place the refrigerant beside the equipment, connect the pipe to the filling port, and turn on the self-priming pump to complete the filling process. You can also manually add refrigerant through the liquid filling port. For the recovery of refrigerant, this equipment is specially designed with the connection of external pipelines. The refrigerant can be self-suctioned and recovered by the built-in self-priming pump or recovered by an external air source.

Contact LNEYA

Submit your request to us and we will contact you within 24 hours

*
*
Submitting….
Submitted successfully!
Submission failed! Please try again later
Email error!
Phone error!