The Analysis Of How To Maintain The Low Temperature Circulator In Daily Life
Guanya is a leading role in heating cooling circulator. It provides the customers with proposal and technology of controlling the cold and heat, temperature control system with stable property, extending the service life of heating cooling circulator at the most extent. In daily life, we should know about the maintenance method.
The manufacturers suggest that to check the fastening bolt of power wiring if it is loose, the normal status of high or low pressure value, and the running current or insulation resistant regularly.
It is important that if the device for drying and filtering of heating cooling circulator and sight glass are running normally. If the exit frosts, it indicates the filter is blocked which needs clean filter; if the sight glass demonstrates the wetness ( it turns red), the core of device for drying and filtering wants to be changed.
It is vital that lubricating lube of heating cooling circulator compressor works. When operating, the fuel level is lower than two of thirds of oil sight glass, lubricant should be added; if there is foul or deterioration, lube should be replaced, and filter ought to be cleaned or changed; at the same time, filter core should be changed.
It is suggested that when heating cooling circulator has been used for a long time, conduction oil should be checked every three or six months, and the replacement is determined according to the practical situation. The heating cooling circulator of Guanya in Wuxi applies totally-enclosed circulation line where heat transfer oil will not be leaked or polluted. Pay attention to the replacement when foreign matter or water go into the oil box.
Please be informed by manufacturers that if the heating cooling circulator is not used for the time being, to clean the conduction oil left in the pipe, and to maintain and keep dry.
Related recommendations
-
Common faults of plate heat exchangers in new energy vehicle inspection
787The reason for the excessive pressure drop of the new energy vehicle detection is that the running system pipeline is not properly purged, especially in the newly installed system pipeline, many dirt (such as welding slag) enters the interior of t...
View details -
Dynamic and accurate temperature simulation for test benches in the automotive industry
466Quality and safety testing are the core elements of the overall development and production process of the automotive industry. With KRY-475 and 455 process cooling circulators, we provide customers with a perfect temperature control solution for p...
View details -
Maintenance instructions for compressors at minus 85 degrees ultra low temperature freezer
519The compressor in the ultra-low temperature freezer of minus 85 degrees is one of the main components, and its performance is very important, so maintenance is also very important. For manufacturers of sub-85 degree ultra-low temperature freezer c...
View details -
We are LNEYA, a manufacturer of chillers
607LNEYA chiller manufacturer is committed tothe R&D, production and sales of refrigeration and heating temperaturecontrol systems, ultra-low temperature freezers, new energy automobilecomponent testing systems, and heating cycle systems. The ...
View details