Wuxi Guanya Refrigeration Technology co., ltd

How to solve the common faults of industrial circulating chillers?

For industrial circulating chillers, if they are always in a high-temperature operating state, a large amount of cold air will be seriously lost. After ensuring the sealing effect of the use environment, effective thermal insulation can be carried out for the industrial chiller in a timely manner to ensure that the industrial circulating chiller is in a stable operating state. Stable operating efficiency can increase the efficiency of lowering the temperature in the unit environment and reduce the energy consumption of industrial chillers.

In order to maintain the safety and stability of the operation of industrial circulating chillers, comprehensive heat treatment is aimed at. The reason why heat insulation is very important is that the main reason is that heat insulation can control most of the heat outside the operating environment. It is obvious that the high temperature environment has an impact on various components of the industrial circulating water chiller, resulting in the threat of the safe operation of the equipment. Thermal insulation is very important.

Insulate the industrial chiller and hire professional personnel to complete it. Since many parts of the internal components of the industrial chiller can be insulated, many places cannot be insulated. Therefore, when the equipment is thermally insulated, it should be conducted under the guidance of professionals. The better the heat insulation effect, the higher the operational safety of the industrial chiller in the later period, which can reduce the probability of industrial chiller failure and extend the service life of the industrial chiller. It is very helpful for enterprises to use industrial chillers for a long time. Note: When completing the insulation treatment of industrial chillers, in order to obtain a better treatment effect, enterprises need to choose higher-quality insulation materials.

In order to ensure that the industrial circulating chiller is in a safe and stable operating state, a comprehensive thermal insulation treatment is required before use. Regardless of the location of the pipes or various accessories of the industrial chiller, as long as it can complete the thermal insulation treatment, comprehensive insulation is carried out, thereby improving the operation safety of the industrial circulating chiller. Reduce the probability of various failures of the refrigerator, and meet the needs of enterprises for high-efficiency operation of industrial chillers with higher operating efficiency. Because different insulation materials cost differently, choose products with lower prices and better insulation effects as much as possible, which can reduce the cost of insulation for enterprises. Only the use of high-quality industrial chiller insulation materials can successfully complete all thermal insulation processes, provide a more comfortable operating environment for industrial circulating chillers, and avoid being affected by various failures.

The above are the analysis and introduction of the specific reasons that need to be insulated during the use of industrial circulating water chillers. I hope you can get and understand these points of attention after reading.
Related News
Related Products
  • SLJ -110℃~-150℃

    SLJ -110℃~-150℃

    January 11, 2018Temperature ranges from - 5 ~ - 150 ℃, can meet different temperature; Adopt environmental protection refrigerants; Famous brand semi-closed piston compressor, semi-closed bipolar piston compressor, semi-hermetic screw compressor, main brand are BOCK.view
  • Single Fluid Heat Transfer System SR

    Single Fluid Heat Transfer System SR

    April 10, 2018Working temperature range from -25℃to 200℃, other temperature range need to set to the widest temperature range(-50℃to 250℃) Centralized control of 2~20 reactors, each reactor's and jacket temperature can be set independently. One system control multipleview
  • Reactor Temperature System ZLF

    Reactor Temperature System ZLF

    April 10, 2018A set of cooling heat exchanger, heat exchanger, through proportional adjusting valve control cold heat into the heat exchanger, then through the uniform medium input to the reactor jacketed to do heat exchange and temp. Control, system has inside expansiview
  • LT -45℃~30℃

    LT -45℃~30℃

    April 10, 2018Low Temperature Cooling Chiller LT model: LT-5018N,LT-5040N,LT-5062N,LT-5090N,LT-50A1N,LT-50A2N;view
  • IC Test Cooling Chiller -45℃~250℃

    IC Test Cooling Chiller -45℃~250℃

    February 28, 2019-45℃~+200℃ 2.5kW~25kW ±0.3℃view
  • Flash EMMC Thermal Head  -85℃~200℃

    Flash EMMC Thermal Head -85℃~200℃

    February 28, 2019Temperature control range:-85 ° C ~ 200 ° CPower range:2.5kW~25kWTemperature control accuracy:±0.3°CModelTES-8525WTES-8555WTES-85A10WTES-85A15WTES-85A25WTemp. Range-85℃~200℃-85℃~200℃-85℃~200℃-85℃~200℃-85℃~200℃Heating P...view
Contact US
Tel: + 86 18751545184
E-mail: sales@cnzlj.com
Add: No.203, Hongyun Road, Hongshan Street, Optoelectronics Park, Xinwu District, Wuxi City, Jiangsu Province, China
code chat