Wuxi Guanya Refrigeration Technology co., ltd

Precautions for safe use of heat transfer oil temperature control equipment

With the extensive use of thermal oil temperature control equipment, the safe use of thermal oil temperature control equipment is a concern for users. For manufacturers, it is very important to share the precautions for the use of thermal oil temperature control equipment.

For users of thermal oil temperature control equipment, the fire protection of these electric heating equipment is very important. Firstly, analyze the cause of the general fire in the electric heating equipment. Place the electric heater that is energized near the flammable or inflammable material, and cause a fire under the high temperature baking for a long time. The electric heater is not equipped with a plug, and the electric wire head is directly inserted into the socket, so that a short circuit may occur and a fire may occur. The user of the heat-conducting oil temperature control device does not remove the plug of the electric heater when leaving, and the time is too long, causing the electric heater to overheat and igniting the adjacent combustible material to cause a fire. The heat-conducting oil temperature control equipment heating wire is used after repeated repairs, which may cause the line to be overloaded and cause a fire. It is worth noting that the heating wire of the heat-conducting oil temperature control device is made of nickel or chrome alloy. Since the power of the electric heater is relatively large, the user may accidentally ignore the safety, and the fire may occur at any time.

In order to prevent the heat conduction oil temperature control equipment from catching fire, the wire must be installed with a plug. The wire end should not be directly inserted into the socket. The temperature of the heat conduction oil temperature control equipment should be replaced in time. The electric heater without the fuse installed in the circuit should not be used. When the temperature control equipment of the heat transfer oil is used, it must be taken care of. When leaving, the plug should be unplugged. In the course of use, if there is a power outage, the plug should be pulled out in time, and should not be forgotten. For the heating wire that has been repaired many times, it is recommended not to use it, and a new heating wire should be replaced. Inflammable and explosive materials are strictly prohibited from drying with heat-conducting oil temperature control equipment. The electric oven should have a temperature-controlled device that prevents the temperature from being too high and prevents the baking time from being too long.

Users and friends, when using heat transfer oil temperature control equipment, can not place flammable materials near the heat transfer oil temperature control equipment, it is recommended to maintain a certain safe distance. (This article is from the source network, if there is any infringement, please contact Lneya to delete, thank you.)
Related News
Related Products
  • Water Cooled Chiller

    Water Cooled Chiller

    January 11, 2018Temperature ranges from - 5 ~ - 150 ℃, can meet different temperature; Adopt environmental protection refrigerants; Famous brand semi-closed piston compressor, semi-closed bipolar piston compressor, semi-hermetic screw compressor, main brand are BOCK.view
  • Single Fluid Heat Transfer System SR

    Single Fluid Heat Transfer System SR

    April 10, 2018Working temperature range from -25℃to 200℃, other temperature range need to set to the widest temperature range(-50℃to 250℃) Centralized control of 2~20 reactors, each reactor's and jacket temperature can be set independently. One system control multipleview
  • Reactor Temperature System ZLF

    Reactor Temperature System ZLF

    April 10, 2018A set of cooling heat exchanger, heat exchanger, through proportional adjusting valve control cold heat into the heat exchanger, then through the uniform medium input to the reactor jacketed to do heat exchange and temp. Control, system has inside expansiview
  • Low Temperature Chiller

    Low Temperature Chiller

    April 10, 2018Low Temperature Cooling Chiller LT model: LT-5018N,LT-5040N,LT-5062N,LT-5090N,LT-50A1N,LT-50A2N; Medium Temperature Range: -45℃~30℃. ASET multifunctional controller, control outlet temperature of water tankview
  • Wafer Test Chiller

    Wafer Test Chiller

    February 28, 2019-45℃~+200℃ 2.5kW~25kW ±0.3℃view
  • Chip Test Heating Cooling System

    Chip Test Heating Cooling System

    February 28, 2019Temperature control range:-85 ° C ~ 200 ° CPower range:2.5kW~25kWTemperature control accuracy:±0.3°CModelTES-8525WTES-8555WTES-85A10WTES-85A15WTES-85A25WTemp. Range-85℃~200℃-85℃~200℃-85℃~200℃-85℃~200℃-85℃~200℃Heating P...view
products
Contact
Tel: + 86 13358153746
E-mail: sales@cnzlj.com
Add: No.203, Hongyun Road, Hongshan Street, Optoelectronics Park, Xinwu District, Wuxi City, Jiangsu Province, China
code chat