What are the functions of the controllers for semiconductor temperature control equipment?
In the temperature control equipment of semiconductor components, each accessory has a different function. Due to the different functions, the function of the temperature control valve and controller of the semiconductor components of LNEYA is different.
The temperature-controlled water pump of the semiconductor component is a tool for accelerating the flow of water to enhance the heat transfer effect of the water in the heat exchanger. The water flow switch of the semiconductor temperature control device is used for the control or interruption protection of the fluid flow in the pipeline. When the fluid flow reaches the set value, the switch automatically cuts off (or turns on) the circuit. The pressure controller is used for pressure control and pressure protection. The unit has low pressure and high pressure controllers to control the working range of the system’s pressure. When the system pressure reaches the set value, the switch automatically cuts off (or turns on) the circuit.
The differential pressure controller of the semiconductor temperature control device is used as a pressure difference control, and when the pressure difference reaches the set value, the switch automatically cuts off (or turns on) the circuit. The temperature controller is used for control or protection of the unit. When the temperature reaches the set value, the switch automatically cuts off (or turns on) the circuit. In our products, temperature control is often used to control the unit’s start and stop conditions. Some still require a temperature controller like antifreeze.
The semiconductor temperature control device is used to indicate the condition of the refrigerant in the liquid line in the refrigeration device, the water content in the refrigerant, the flow condition of the lubricating oil from the oil separator in the return line, and some sight glass belts. There is an indicator that indicates the water content in the refrigerant by changing its color. (green means dry and yellow means wet). The volume change of water caused by temperature changes, the expansion tank is used to store this part of the expansion water, the system is regulated and fixed, and the system can compensate part of the water.
The semiconductor temperature control device is a relatively new device, and the performance above is required to be higher to be more stable.
Related recommendations
-
Matters Needing Attention in Replacing Refrigerant Oil of the Screw Chiller Factory
366The refrigerant oil in the screw chiller factory needs regular inspection and replacement. We all know that different grades of refrigerant oil cannot be mixed together, otherwise it will cause abnormal or strike conditions of the screw chiller fa...
View details -
Water cooled low-temperature circulators in the testing industry of new energy vehicles
323The development of the new energy vehicle industry is relatively rapid. Driven by technological innovation, it is believed that the new energy vehicle industry is facing opportunities. However, with the development of the new energy vehicle indu...
View details -
What are the causes of the blockage of the cooler?
397The LNEYA Chiller Cooler HRT whole system is a closed liquid circulation system with the expansion of container, expansion of the container and the liquid circulation is adiabatic, and do not participate in liquid circulation, only mechanical conn...
View details -
Automotive new energy battery / motor thermal management performance test
3801. Thermal management physical architecture analysis New energy vehicle thermal management systems typically include engine cooling systems, power device cooling systems for motors, motor controllers, battery pack cooling/heating systems, passenge...
View details