Search

• What Is a Burn In Chamber2025-08-19
• Why Chip Testing Needs Semiconductor Chillers2025-08-19
• Semiconductor Chillers in Chip Testing2025-08-19
• Semiconductor Chillers in Wafer Dicing2025-08-19
• Semiconductor Chillers in Packaging2025-08-19
• How to Upgrade an Old Chiller to Improve Efficiency2025-08-15
• Chiller Tanks Comparison Expansion Tank vs Buffer Tank2025-08-15
• Expansion Tanks in Semiconductor Chillers2025-08-15

• August 2025
• July 2025
• June 2025
• May 2025
• March 2025
• February 2025
• January 2025
• December 2024
• November 2024
• October 2024
• September 2024
• August 2024
• July 2024
• June 2024
• May 2024
• April 2024
• March 2024
• February 2024
• September 2023
• July 2023
• June 2023
• May 2023
• January 2023

air cooled chiller chiller chillers Cold Assembly Freezer cooling chiller cooling heating circulator cooling heating system cooling water chiller Double-Layer Glass Reactor dynamic temperature control system Fluorinated liquid temperature control freezer gas cooling chiller heating circulator industrial chiller industrial cooling industrial freezer industrial refrigerator jacket reactor liquid cooling chiller low temperature chiller news pharmaceutical chiller process chiller reactor chiller reactor cooling reactor cooling heating reactor heating cooling reactor system refrigerated circulator refrigeration chiller screw chiller semiconductor chiller semiconductor test chiller sundi tcu temperature control test chamber thermostat ultra low temperature chiller vehicle test chiller water chiller water cooled chiller wtd

Every microchip goes through a long road before it finds its way into a phone, a car, or a medical device. The process does not end after production. Each chip faces strict testing to prove its reliability and performance. Without testing, no fab can ship products that meet the speed, power, and safety standards customers expect.
 
Temperature control sits at the center of chip testing. The tiny structures inside wafers react instantly to heat. Even a small shift in degrees can cause errors in measurements, false failures, or worse—chips that pass the test but fail in real-world use. To solve this, fabs rely on semiconductor chillers. These systems keep test conditions stable, precise, and repeatable.

What Is Chip Testing?

---

Chip testing, sometimes called IC testing, is the step where each integrated circuit is verified under different operating conditions. It checks whether the chip performs according to its design before it leaves the factory.
 
Tests can happen at wafer level or after packaging. In wafer probing, hundreds of chips on a wafer are checked in parallel. After packaging, the devices are tested again to confirm the package did not introduce defects.
 
During these stages, engineers apply voltage, current, and signal patterns while monitoring the chip’s response. They stress the device with temperature swings, high workloads, and voltage shifts. The goal is to uncover weak points before the chip reaches the customer.

The Key Projects in Chip Testing

---

Chip testing covers many areas. Some of the most common include:
 
• Functional testing: Does the chip do what the design intended? This test runs logic operations, memory checks, and timing analysis.
 
• Parametric testing: Engineers measure electrical properties like resistance, capacitance, and leakage. These numbers reveal whether the chip can perform within spec.
 
• Burn-in testing: Chips are run at high temperatures and voltages for hours or days. This simulates years of real-world use in a short time.
 
• Environmental stress testing: Here, chips face extreme cold and heat cycles. This proves they can survive automotive, aerospace, or industrial applications.
 
All of these projects share one thing—temperature control. Without a reliable cooling system, the results are inconsistent. That is where semiconductor chillers enter the picture.

Why Chip Testing Needs Semiconductor Chillers？

---

A chiller may look like just another box on the production floor, but in chip testing it is essential.

Temperature control

Heat is unavoidable. As chips process signals, they generate heat. Testing equipment itself also adds more heat. If the test board warms up, the chip under test no longer sees the conditions engineers intended. The numbers become unreliable.

Simulating the real world

Chips must face real-world temperatures. A phone processor might need to work at -20°C on a winter morning or 45°C inside a hot car. Chillers allow test systems to swing between these points with tight accuracy. Without them, stress tests cannot simulate real-life use cases.

High-precision

Imagine a test where the setpoint is 25°C, but the actual temperature drifts by 2°C. That tiny swing may cause the chip to fail in the lab even though it would work in the field—or worse, pass in the lab and fail later in a customer’s hands. Chillers stop that drift by holding temperature within fractions of a degree.

Reliability

Testing hundreds of wafers each day is expensive. If equipment overheats or delivers inconsistent data, production slows and yield drops. A well-designed semiconductor chiller keeps lines moving, results accurate, and scrap rates low.

How to Select a Semiconductor Chiller for Chip Testing？

---

Not every cooling system is ready for chip testing. Engineers must balance speed, precision, and reliability when making a choice.

Temperature range

Tests often push chips through extremes, from cryogenic lows to scorching highs. A capable chiller can span -80°C to +200°C and shift between points without lag.

Accuracy

A system that holds steady within ±0.02°C ensures that results are consistent and reproducible, instead of drifting with each cycle.

Cooling Capacity

A tabletop setup may draw only a few kilowatts, while a burn-in chamber can demand far more. Matching cooling power to the actual load prevents test interruptions.

Response speed

When conditions change, the system must ramp up or down quickly. Slow transitions waste time and create bottlenecks. Advanced models manage sharp heating and cooling swings with ease.

Connectivity

Modern chillers link directly to wafer probers and automated test equipment. Protocols like RS-485 or Ethernet allow smooth communication and remote control.

Reliability

Semiconductor fabs run around the clock, so breakdowns translate into real losses. Choosing equipment with proven uptime, accessible service, and long life helps secure production goals.
 
For cutting-edge fabs, options such as recirculating chillers, cascade refrigeration, or chiller heater systems deliver the flexibility needed for diverse and demanding test programs.

Conclusion

---

For fabs, choosing the right semiconductor chiller is as critical as selecting the right tester or probe card. If your team is planning new test lines or facing stability issues with current setups, it may be time to upgrade. Our semiconductor chillers are built for accuracy, fast response, and non-stop operation in demanding fabs.
 
Reach out today and let’s discuss how the right chiller can support your chip testing goals.