Thermal Probe

KSD -75℃～+200℃

Supports rapid heating and cooling from extremely low temperatures to high temperatures. The fastest rate can reach 50’C/min. It can accurately control the temperature, and the error is usually within +0.2℃.

Applied to chip R&D: Verify the performance of the chip at different temperatures during the chip design phase;
Quality control: Conduct reliability tests during chip production to ensure that the product meets the standards;
Failure analysis: Analyze the effective mode of the chip at extreme temperatures through high and low temperature tests.

Email Us

WhatsApp Us

Cooling Capacity -40℃@600W

Heating cooling rate Up to 75℃/min

Temperature Accuracy ±0.2℃

Temperature monitoring type T type/K type/PT100

KSD SERIES

-75°C

lowest

200°C

Highest

±0.2℃

Temperature control accuracy

Model		KSD-705	KSD-705PULS	KSD-710
Temp. Range		-70℃~200℃	-75℃~200℃	-75℃~200℃
Cooling Capacity	0℃	800w	1000w	2000w
	-40℃	500w	800w	1500w
	-55℃	300w	450w	900w
Test probe specifications		75*75mm	75*75mm	120*120mm
Temperature control point location		Plunger surface temperature	Plunger surface temperature	Plunger surface temperature
Control panel		7-inch touch screen	7-inch touch screen	7-inch touch screen
Controller		PLC	Plc	Plc
Power Supply		200v~230v 50hz/60hz
Product Dimension		465600365	500600400	550750550

CDA requirements

Equipped with LNEYA Dryer gas dryer series

Force adjustment for test specimen

Equipped with Z-axis pneumatic actuator

Communication

Madbus RTU /TCP 、Prfibus DP 、CAN 、Rrofinet

LNEYA never disappoints users！

Features of Thermal Probe

The test head is designed with a dry gas channel layout to provide low dew point gas to the equipment, which can keep the DUT and test head in a stable dry environment without condensation or freezing.

Send Inquiry Now

LNEYA never disappoints users！

Application of Thermal Probe

The sensor is installed on the plunger module, which provides more timely and accurate temperature response.

The plunger module can be customized for easy disassembly and assembly.

The device is equipped with an external sensor receiving port that can directly measure the measured object. Switching to workpiece mode allows for direct control of the temperature of the tested component.

Send Inquiry Now