Refrigeratori industriali LNEYA Produttore Fornitore
Notizie
Misunderstandings in the use of vacuum pump temperature control system
When using the vacuum pump temperature control system, only the correct operation method can ensure the normal and stable operation of the equipment. If there are many wrong operation behaviors, it will directly affect the normal use of the equipment, and even affect the cooling performance. 1. When starting up, adjust the pressure drop of the inlet and outlet water higher than the operating parameters. When the pressure drop is too high, open the inlet and outlet valves of the evaporator of...
Visualizza i dettagli
Installation method of heating and cooling temperature control system for automobile motor
In chemical and pharmaceutical, chemical laboratories, pilot plants and other industrial processes, the heating and cooling temperature control system is the most used equipment for temperature control in chemical manufacturing, so a highly dynamic temperature control system is required. When controlling the reactor temperature, exothermic and endothermic reactions must be compensated for with high speed and reliability. Selection must take into account a variety of influences and conditions....
Visualizza i dettagli
What are the requirements for the cooling and heating temperature control equipment of the 500-liter
The 500-liter reaction kettle cooling and heating temperature control equipment is a dynamic temperature control system, a fully closed circulation pipeline, which can be automatically heated or cooled according to the process requirements. 1. A series of exothermic and endothermic reactions will occur during the polymerization reaction of the 500-liter reactor with cooling, heating and temperature-controlling equipment. 2. It can control one or more reactors at the same time. It is a large s...
Visualizza i dettagliHigh-low temperature control system with different configurations of high-pressure reactors
Different configurations of high pressure reactors, the quality of products brought by different manufacturers is not the same, but the points of attention are the same, you need to pay attention to it. 1. To be used at the designated location and follow the instructions for use. Check the test pressure, operating pressure, operating temperature and other conditions engraved on the main container, and use it within the allowable range of conditions. 2. The high-pressure reactor is a precision...
Visualizza i dettagli
Analysis of the work and industry application of the chiller
Although there are many different types of chillers, most use the same cooling principle. An important part of the process is the coolant or refrigerant, which holds more heat than water and helps maintain an efficient cooling process. Heat is removed from the coolant and released into the air. The concept of a cooler is based on the principle that cooling involves removing heat from a process and releasing it into the air. All chillers have condensers, compressors, expansion valves and evapo...
Visualizza i dettagli
Where can industrial heating circulators be useful?
The industrial heating circulator can provide a circulation device of cold source and heat source, and has a wide working range. It is used in the pharmaceutical, chemical, biological and other industries to provide heat and cold sources for reactors, tanks, etc., and can also be used for heating and cooling of other equipment. 1. Due to the heating and cooling effect of the industrial heating circulator, the material temperature can be kept constant (heating and cooling) during the producti...
Visualizza i dettagli
About the components of the reactor chiller refrigeration heating circulator
The reactor chiller refrigeration and heating circulator is used to control the heater and cooler, adjust the temperature, and maintain the stable temperature of the material. Through the circulating medium, the temperature of the material can be quickly controlled to further improve the efficiency of the product, so that it can be transported to the cooling equipment normally. Refrigerant, and can make the refrigerant form a continuous circulation loop in the system, so as to reduce the temp...
Visualizza i dettagli
What are the applications of steam circulators in chemical industry?
The steam circulator in the chemical industry is a temperature control equipment in the pharmaceutical and chemical industry. When users operate, they need to understand the performance and maintenance knowledge in order to operate the equipment effectively. 1. It can be heated and cooled quickly, can move up and down continuously, and has a wide temperature control range. It does not need to replace the heat transfer medium in the whole process, and reduces the consumption of heat transfer m...
Visualizza i dettagli
Vehicle high temperature and high humidity test vehicle anti-aging performance
On test benches in the automotive industry, accurate temperature simulation is critical. From the time of the test, the air temperature in the test chamber has always been maintained at 45 ℃, which is equivalent to the hottest area of the Flaming Mountains in Turpan, Xinjiang, China. Ultra-high temperature environments cause all automotive components, from control electronics to gaskets and load-bearing elements, to experience severe temperature fluctuations that, in addition to mileage, str...
Visualizza i dettagli
What is the function of high temperature heat transfer fluid system？
The high temperature heat transfer fluid system adopts a fully closed circulation system, so that there is no oil mist during high temperature operation, and high temperature refrigeration can be realized. It is the temperature control equipment used in many industries at present. 1. High temperature heat transfer fluid system is used with most experimental equipment, such as rotary evaporator, uniform temperature, constant liquid environment. It is forbidden to store in the open air, avoid ...
Visualizza i dettagli
