The high-low temperature integrated machine for glass reactor is used in the pharmaceutical and chemical industry. However, it is necessary to pay attention to the operation. Once the bearing overheating occurs, it needs to be solved in time to avoid affecting the operation of the high and low temperature machine.
The high-low temperature integrated machine for glass reactor directly uses the compressor when the temperature is lowered at high temperature, which avoids the situation that the scale will cause the heat transfer of the system to be poor after the water is cooled for a long period of time. The electronic or mechanical valve is not used for medium switching, which prolongs the use of the system. The time is the top five in the industry's high and low temperature integrated machine list, and the quality is reliable.
The superheating of the high and low temperature integrated machine for the glass reactor may be caused by the friction between the components of the high and low temperature integrated machine main shaft or the main shaft and the bearing housing. At this time, it is necessary to check the special high and low temperature integrated machine for the glass reaction kettle, which part is rubbed and then treated. One of the reasons may be that the motor shaft and the fan shaft are not concentric, so that the inner rolling bearing in the bearing housing cannot move. At this time, adjusting the concentricity of the two shafts makes the high-low temperature integrated machine of the glass reactor better, and may also be the lubrication of the bearing housing. Too much fat, in general, it is recommended that the grease in the box is 1/3~1/2 of the space of the box. Too much or too little is not suitable for the operation of the high and low temperature machine; it may also be the bearing and the bearing box hole. There is a gap between them and the bearing box bolts are too tight or too loose. It is recommended to adjust the bolts to solve the problem.
These faults are relatively simple, as a professional manufacturer of high and low temperature - LNEYA still recommends that you choose a reliable and reliable manufacturer.
