Wuxi Guanya Refrigeration Technology co., ltd

How to save energy in the vacuum chamber refrigeration heating thermostat control unit

In the environment of energy-saving and emission-reduction operation, how to operate the LNEYA vacuum chamber cooling and heating thermostat control unit is very important. Let's take a look at a few tips to reduce the consumption and see how to use it.

The very important first step in the selection of the vacuum chamber cooling and heating thermostat control unit is that the cooling capacity is too small, which affects the production, and often loses more than the loss; however, the excessive cooling capacity will inevitably increase the cost of the enterprise and cause unnecessary waste. It is recommended that the manufacturer introduce the detailed process in the process of purchasing, and let the professional personnel calculate the appropriate model, the object to be cooled and the time required to reduce the required temperature.

In this process, we must pay attention to some manufacturers to do some small articles on the cooling capacity, often exaggerating the energy efficiency ratio, in fact, these things can pay attention to the greasy ones, there are related data showing the cooling capacity power theoretically. Data, in the actual production process, the cooling capacity will be lower than the theoretical value, according to the actual situation of the environment, the cooling capacity will fluctuate.

The vacuum chamber refrigeration heating constant temperature control unit increases the evaporation temperature under the premise of ensuring the production demand and meeting the safety of the equipment or the product, and appropriately reduces the condensation temperature and increases the flow rate of the cooling tower to ensure the cooling water effect;

Improve regular daily maintenance work, regularly clean the pipeline, reduce pipe resistance and prevent pipe fouling, increase flow, ensure that the evaporator and condenser fully replenish water, enhance heat transfer efficiency, and unclean water source during long-term use. Will produce calcium carbonate and magnesium carbonate deposition pipelines, affecting heat transfer efficiency, increase the power required for the operation of the equipment, so that the electricity costs increase significantly, invisibly increase the cost of the enterprise.

The LNEYA vacuum chamber refrigeration heating constant temperature control unit adopts a fully enclosed pipeline. In the process of operation, the energy consumption ratio can be reduced to a certain extent, so that the vacuum chamber refrigeration heating constant temperature control unit operates efficiently.

Related News
Related Products
  • SLJ -110℃~-150℃

    SLJ -110℃~-150℃

    January 11, 2018Temperature ranges from - 5 ~ - 150 ℃, can meet different temperature; Adopt environmental protection refrigerants; Famous brand semi-closed piston compressor, semi-closed bipolar piston compressor, semi-hermetic screw compressor, main brand are BOCK.view
  • Single Fluid Heat Transfer System SR

    Single Fluid Heat Transfer System SR

    April 10, 2018Working temperature range from -25℃to 200℃, other temperature range need to set to the widest temperature range(-50℃to 250℃) Centralized control of 2~20 reactors, each reactor's and jacket temperature can be set independently. One system control multipleview
  • Reactor Temperature System ZLF

    Reactor Temperature System ZLF

    April 10, 2018A set of cooling heat exchanger, heat exchanger, through proportional adjusting valve control cold heat into the heat exchanger, then through the uniform medium input to the reactor jacketed to do heat exchange and temp. Control, system has inside expansiview
  • LT -45℃~30℃

    LT -45℃~30℃

    April 10, 2018Low Temperature Cooling Chiller LT model: LT-5018N,LT-5040N,LT-5062N,LT-5090N,LT-50A1N,LT-50A2N;view
  • IC Test Cooling Chiller -45℃~250℃

    IC Test Cooling Chiller -45℃~250℃

    February 28, 2019-45℃~+200℃ 2.5kW~25kW ±0.3℃view
  • Flash EMMC Thermal Head  -85℃~200℃

    Flash EMMC Thermal Head -85℃~200℃

    February 28, 2019Temperature control range:-85 ° C ~ 200 ° CPower range:2.5kW~25kWTemperature control accuracy:±0.3°CModelTES-8525WTES-8555WTES-85A10WTES-85A15WTES-85A25WTemp. Range-85℃~200℃-85℃~200℃-85℃~200℃-85℃~200℃-85℃~200℃Heating P...view
Contact US
Tel: + 86 18751545184
E-mail: sales@cnzlj.com
Add: No.203, Hongyun Road, Hongshan Street, Optoelectronics Park, Xinwu District, Wuxi City, Jiangsu Province, China
code chat