Diverse considerazioni importanti per le imprese quando si utilizzano i raffreddatori per riscaldamento
Oltre a quanto sopra indicato, le imprese devono prevedere una persona responsabile dell'avvio e dell'arresto dei frigoriferi, degli interruttori, delle riparazioni e della manutenzione. Le precauzioni per l'uso dei frigoriferi nelle aziende sono...
First, the refrigerant leaked
Leakage of refrigerant not only affects the cooling efficiency of the heating and cooling machine, but also affects the health of the personnel involved in the engine room due to leakage of the refrigerant. Therefore, the problem of leakage of the refrigerant must be noticed.
Under normal circumstances, the refrigerant is not a consumable product, so it will not be constantly missing. If it is often or abruptly missing, it is recommended to check whether the refrigerant in the refrigerator is leaking. If there is a leakage problem, the leak should be found in time and make up for leaks, or replace the relevant refrigerant piping and connections. And if necessary, it should perform forced ventilation.
Second, pay attention to the load of the refrigerator
The load on the refrigerator is larger, or it exceeds the rated load, resulting in overload, which will affect more serious problems, including reduction of cooling efficiency, increase of noise, increase of vibration amplitude, excessive consumption of electrical resources, reduced life expectancy and so on. It needs to pay attention!
Third, temperature and pressure
It can be said that the parameters related to temperature and pressure are the most important parameters of the refrigerator. Enterprises should pay attention to the parameters related to the temperature and pressure of the refrigerator. Solve problems in time, and avoid affecting the normal operation of the refrigerator.

Raccomandazioni correlate
-
Temperature control range and accuracy of high and low temperature tester
1017The temperature control accuracy of heat transfer oil medium of the high and low temperature tester used for component testing is plus or minus 0.5 ℃, which solves the problem of temperature control lag in electronic components. Main advantages of...
Visualizza i dettagli -
Lneya’s high and low temperature cooling circulator instructions
1065The high and low temperature cooling circulator is developed and produced by LNEYA using its refrigeration and heating temperature control technology. When using high and low temperature cooling circulators, users are advised to use them according...
Visualizza i dettagli -
How does the Industrial Water Chiller System Work?
1248When using industrial machinery, a cooling system may be required to prevent the machine from overheating. Refrigeration equipment can effectively keep materials in the optimal temperature range, but how does the chiller work? Understanding the wo...
Visualizza i dettagli -