Ricerca

• What Is Horsepower in Chillers2025-11-10
• Common Types of Mould Temperature Controller2025-11-10
• When Is the Best Time to Buy Chillers2025-11-07
• Industrial Chillers for MRI Machines Cooling Application2025-11-07
• Chiller vs Air Conditioner2025-11-06
• How Cooling Capacity Affects Chiller Price2025-11-06
• What Is a Fluid Chiller2025-11-06
• How Much Does an Air-Cooled Chiller Cost2025-11-06

• Novembre 2025
• Ottobre 2025
• Settembre 2025
• Agosto 2025
• Luglio 2025
• Giugno 2025
• Maggio 2025
• Marzo 2025
• Febbraio 2025
• Gennaio 2025
• Dicembre 2024
• Novembre 2024
• Ottobre 2024
• Settembre 2024
• Agosto 2024
• Luglio 2024
• Giugno 2024
• Maggio 2024
• Aprile 2024
• Marzo 2024
• Febbraio 2024
• Settembre 2023
• Luglio 2023
• Giugno 2023
• Maggio 2023
• Gennaio 2023

refrigeratore raffreddato ad aria refrigeratore Installazione di un refrigeratore Chiller Maintenance refrigeratori Congelatore a freddo refrigeratore di raffreddamento circolatore di raffreddamento e riscaldamento sistema di raffreddamento e riscaldamento cooling system sistema di controllo dinamico della temperatura chiller ad alta efficienza energetica chiller antideflagrante congelatore circolatore di riscaldamento refrigeratore industriale refrigeratori industriali raffreddamento industriale congelatore industriale frigorifero industriale reattore a camicia refrigeratore da laboratorio refrigeratore a bassa temperatura notizie refrigeratore d'olio refrigeratore di processo Prozesskühlung reattore refrigeratore raffreddamento del reattore raffreddamento del reattore riscaldamento riscaldamento del reattore raffreddamento circolatore refrigerato refrigeratore a vite refrigeratore per semiconduttori refrigeratore di prova per semiconduttori sundi tcu controllo della temperatura camera di prova termostato refrigeratore a bassissima temperatura refrigeratore di prova per veicoli refrigeratore d'acqua refrigeratore raffreddato ad acqua

Anyone who has worked with refrigeratori industriali for a while knows that refrigerante levels are not something you can ignore. A chiller may keep running with low refrigerant, but the performance drops quietly at first and then problems escalate. Insufficient refrigerant charge stresses components, increases energy costs, and shortens system life.
 
This article explains how to check levels, why charge drops, what happens when you do not act, and how to fix it.

How to Check Refrigerant Levels in a Chiller

---

Pressure and Temperature Readings

Use a digital manifold and clamp thermometer. Attach gauges to suction and discharge service ports. Record suction pressure, discharge pressure, suction line temperature, and liquid line temperature.
 
Compare your numbers to the manufacturer chart for the current load and ambient. If the suction pressure is lower than expected and superheat is high the charge is likely low.

Sight Glass

If you see continuous bubbles in the liquid line under steady load then the charge is not right. Note that some systems will flash at the sight glass for a short moment on startup. The key is steady operation. If bubbles persist call for a leak check.

Oil Indicators

Check oil level and oil appearance. Foamy oil or a sudden drop in oil level can be a symptom of low refrigerant or liquid return. On screw compressors weigh the oil. If oil is dark or smells burned plan a compressor inspection.

Cooling Performance in Real Operation

Time how long the chilled water supply takes to drop 5℃ after a start. If it takes twice as long as it should the evaporator may be starved of refrigerant. Log the supply and return temps over an hour. A slow pull down combined with low suction pressure is a clear indicator.

Why Do Chillers Run Low on Refrigerant

---

Leaks in the System

Valves, flare connections, brazed joints and service ports are common leak points. Vibration near pipe supports wears fittings. Corrosion eats copper where condensation sits.

Improper Charging

If a chiller was charged hastily or the technician miscalculated the correct fill, the machine might leave the shop already undercharged.

Natural Loss Over Time

Aging and permeation matter on older systems. Rubber seals and gaskets slowly let molecules pass. It is slow but persistent. Small leaks add up to poor refrigerant charge over years.

How Does Low Refrigerant Affect a Chiller

---

Reduced Cooling Capacity

The evaporator cannot boil enough refrigerant to absorb the designed heat load. Chilled water supply temperature rises. Processes take longer to reach setpoint. In molding this may lengthen cycle time. In labs it may ruin a test.

Higher Energy Consumption

The compressor runs longer and often at a higher discharge pressure. You will see higher amp draw on the motor. Our expert usually compare motor amps to nameplate under similar load. A steady 10 percent increase in running amps is a red flag tied to poor refrigerant charge.

Stress on Mechanical Components

Low refrigerant causes higher discharge temperatures. Bearings and valves run hotter. Liquid slugging becomes a risk if charge conditions shift. Repair bills then jump from a simple leak fix to a compressor rebuild.

Product Quality

In industries where chillers support sensitive production such as semiconductors, pharmaceuticals, or plastics, poor refrigerant levels can affect product quality. Temperature swings or insufficient cooling capacity can cause entire production batches to be scrapped.
 
Other side effects include oil foaming and erratic control. Sight glass bubbles can entrain into the oil return. That leads to foaming and reduced oil return which can starve the compressor of lubrication over time.

How to Solve Low Refrigerant Levels

---

Leak Detection

Use an electronic leak detector for HFCs. If you suspect a slow leak do a pressure test with dry nitrogen and soap solution. For very small leaks use an ultrasonic detector. Confirm the location before you plan brazing or part replacement.

Repair the Leak and Pressure Test Again

Never add refrigerant and leave a leak unrepaired. That is wasted money and it hides the real issue. After the repair evacuate to the required vacuum level using a two stage vacuum pump. Replace the filter drier on any open circuit. A clogged drier will hide symptoms and trap moisture.

Recharging the System Correctly

Follow the manufacturer target for charge mass. Then adjust using measured subcooling and superheat. Typical superheat ranges are 5 to 15 ℉ in many systems. Typical subcooling values also sit in the 5 to 15 ℉ window but follow the spec sheet. Verify pressures and temperatures under steady load and log them.

Component Replacement

If the leak was internal, such as a failed plate heat exchanger or compressor crack, consider component replacement. Internal leaks can cause oil migration and compressor damage. Inspect oil samples for metal particles after a big leak event.

Conclusione

---

Low refrigerant is easy to ignore until it forces a shutdown. The fix is straightforward when you catch it early.
 
Contact our team to learn more about our chiller products and our latest news and events.