How to maintain stable performance of biopharmaceutical laboratory oil cooler?

1. A suitable working environment to prevent various failures of the oil cooler in the biopharmaceutical laboratory needs to provide a better operating environment for the equipment. Keep the environment clean and tidy, reduce the impact of various types of dust, thereby improving the stability of heat dissipation, improving the cooling performance, reducing the ambient temperature in a shorter period of time, and reducing the energy consumption of equipment used by enterprises.
2. Maintain a low failure rate, and carry out meticulous maintenance and maintenance on a daily basis. At the same time, operators are required to complete the opening and closing of the equipment according to the use steps required by the manufacturer, so as to avoid wrong operation behaviors and lead to the use of oil coolers in biopharmaceutical laboratories. Life is affected, and even various failures continue to occur.
3. Timely maintenance of minor faults requires the company to timely and effectively complete the entire maintenance process for the failure of the oil cooler in the biopharmaceutical laboratory to reduce the impact of minor faults.
4. It is strictly forbidden to short-circuit the water flow switch circuit during the use of the equipment. Short-circuiting may cause the equipment pipes to freeze and damage, which will affect the normal use of the equipment.
5. In actual operation, operators are required to record various operating data of the equipment on time, analyze regularly, find problems through data, and eliminate hidden dangers for problems.
6. When an alarm occurs, the meaning of the alarm should be judged in time. If it cannot be solved by itself, it should be reported to the refrigerator manufacturer for repair to avoid the expansion of the fault range and the overrun of the maintenance cost.
7. It is strictly forbidden to short-circuit the water flow switch circuit during the use of the equipment. Short-circuiting may cause the equipment pipes to freeze and damage, which will affect the normal use of the equipment.
8. In actual operation, operators are required to record various operating data of the equipment on time, analyze regularly, find problems through data, and eliminate hidden dangers for problems.
In addition to the above methods, the operation management of the oil cooler in the biopharmaceutical laboratory is also very critical. Mastering the scientific operation procedures, maintenance and repair methods of the equipment, as well as the management of the maintenance, transformation and disposal of the refrigeration unit can ensure that the equipment is always in good condition. operating status.
Raccomandazioni correlate
-
Descrizione del prezzo delle apparecchiature Vocs e dell'effetto di condensazione
1114In qualità di produttore di apparecchiature vocali, molti utenti prestano particolare attenzione al prezzo delle apparecchiature vocali al momento dell'acquisto. Quanto ne sapete del prezzo e dell'effetto di condensazione delle apparecchiature vocs e dell'importanza delle prestazioni? Du...
Visualizza i dettagli -
Installation and maintenance of industrial water chiller
942As a industrial temperature control device,industrial water chiller is often in 24-hour operation. Therefore, it is veryimportant to choose a industrial chiller with good performance. Wuxi GuanyaRefrigeration Technology Co., Ltd. specializes in...
Visualizza i dettagli -
I principali campi di applicazione dei refrigeratori raffreddati ad aria
909In the domestic and international industrial water chiller market, our most common industrial water chiller equipment can be roughly divided into two different types, one type is industrial air cooled chiller, the other type is industrial water co...
Visualizza i dettagli -
Istruzioni per il controllo della temperatura della camera di prova a variazione rapida della temperatura
1072The selection of the humidity range of the rapid temperature change test chamber should be noted that the corresponding temperature range should be indicated after the humidity index or the dew point temperature should be given. Because relative h...
Visualizza i dettagli